Library / Applicable to all Oil & Gas Operators GUIDELINES FOR FLARE GAS MEASUREMENT, DATA MANAGEMENT & REPORTING OBLIGATIONS Code: DPR Guide 0005 - 2020
Applicable to all Oil & Gas Operators GUIDELINES FOR FLARE GAS MEASUREMENT, DATA MANAGEMENT & REPORTING OBLIGATIONS Code: DPR Guide 0005 - 2020
Page 35 of 42
Applicable to all Oil & Gas Operators GUIDELINES FOR FLARE GAS MEASUREMENT, DATA MANAGEMENT & REPORTING OBLIGATIONS Code: DPR Guide 0005 - 2020 Revision Date: 1st August 2020 This is a property of the Department of Petroleum Resources. All rights reserved 35 Flare Gas Measurement, Data Management and Reporting Obligations during which the Producers and Processing Facility operators shall install the metering systems as laid out in the Guidelines for Flare Gas Measurement Data Management and Reporting Obligations Unaccounted Flare Gas Flare Gas quantities that Producers cannot account for, calculated as (A*B) - C - D - E - F - G - H, where: A= Associated Gas Production quantities B= 1 - Shrinkage Factor C= Own Consumption quantities D= gas quantities delivered under Existing Offtake Commitments E= Liquids extracted from Associated Gas (if metered or accounted for) F= Flare Gas delivered to Third Party Flare Commercialisation Project G= Flare Gas delivered for Producers Approved Flare Out Project H= measured or accounted Flare Gas quantities going to the Flare Stack Unaccounted Project Flare Gas Flare Gas quantities that the Permit Holder cannot account for with respect to the Flare Gas quantities and composition delivered to the Project, own consumption and the Flare Gas- to- Market Product quantities Vented Gas Gas that is released into the environment without being combusted Vented Gas Quantity The quantity of Flare Gas vented either by a Producer, a Permit Holder or a Processing Facility operator Vented Gas Report Report prepared by the Producer as defined in Schedule B 1.2.4 of the Guidelines for Flare Gas Measurement, Data Management and Reporting Obligations
CodesPDF20202020-0835