Afrindustria/ Gas Gap Monitor

Library / Applicable to all Oil & Gas Operators GUIDELINES FOR THE DESIGN, CONSTRUCTION, OPERATION AND MAINTENANCE OF OIL AND GAS PIPELINE SYSTEMS IN NIGERIA Code: DPR Guide 0027 – 2021

Applicable to all Oil & Gas Operators GUIDELINES FOR THE DESIGN, CONSTRUCTION, OPERATION AND MAINTENANCE OF OIL AND GAS PIPELINE SYSTEMS IN NIGERIA Code: DPR Guide 0027 – 2021

Page 40 of 48

Open the PDF at page 40

 
 
 
 
Applicable to all Oil & Gas Operators  
GUIDELINES FOR THE DESIGN, CONSTRUCTION, OPERATION AND 
MAINTENANCE OF OIL AND GAS PIPELINE SYSTEMS IN NIGERIA  
Code: DPR Guide 0027 – 2021 
 
Effective Date: 14th October 2021 
 
This is a property of the Department of Petroleum Resources. All rights reserved  
 
34 
iii. 
All sources of impressed current rectifiers and other associated devices shall be 
inspected and tested at quarterly intervals to ensure that they are functioning 
properly.  
iv. 
These inspections shall be carried out in the presence of representatives of the 
Department. 
6.3.7 Monitoring of Internal Corrosion 
This shall be by the running of intelligent pig or other internal pipeline survey instrument 
as may be approved by the Department throughout the whole length of the pipeline at 
least once in five years. This inspection (data gathering) as well as the data interpretation 
shall be carried out in the presence of representatives of the Department. A report of such 
inspection shall be lodged with the Department. 
6.4 Upgrade of Maximum Operating Pressure of Pipeline 
Any Licencee that desire to upgrade the maximum operating pressure of its pipeline shall 
lodge an application with the Department of Petroleum Resources to that effect giving 
the following information: 
i. 
The reason for the desire to operate the system at a lower/higher pressure than 
its original maximum designed pressure. 
ii. 
The maintenance/leak/repair history of the pipeline to be upgraded. 
iii. 
The modification that shall be made to the pipeline system to qualify it for 
upgrading in accordance with the specifications contained in ASME 31.8-2018 
iv. 
The test that will be carried out on the pipeline system after upgrading which 
shall be compatible with the procedure outlined in Section 3.4.1 of this document 
in which the upgrade maximum operating pressure will now be pressure 
parameter to use for the tests. 
v. 
Evidence of payment of N 500,000:00 made payable to the Department of 
Petroleum Resources as  processing fees. 
The grant of approval to carry out the upgrading and operate the upgraded pipeline at the 
new pressure shall be contingent upon satisfactory fulfilment of the conditions listed in 
above.