Library / Applicable to all Oil & Gas Operators GUIDELINES FOR THE IMPLEMENTATION OF RISK BASED INSPECTION IN THE NIGERIAN OIL AND GAS INDUSTRY Code: DPR Guide 0022 - 2020

Applicable to all Oil & Gas Operators GUIDELINES FOR THE IMPLEMENTATION OF RISK BASED INSPECTION IN THE NIGERIAN OIL AND GAS INDUSTRY Code: DPR Guide 0022 - 2020

Page 16 of 20

Open the PDF at page 16

Applicable to all Oil & Gas Operators
GUIDELINES FOR THE IMPLEMENTATION OF RISK BASED INSPECTION IN
THE NIGERIAN OIL AND GAS INDUSTRY
Code: DPR Guide 0022 - 2020

Revision Date: 1st August 2020

12
officers/inspectors on demand. Failure to do so shall be considered a non-
compliance.
iii.
Any deviation or non-conformance (i.e. to exceed the Maximum Inspection
Intervals) due to technical/operational constraints shall be documented in line with
the approved procedure(s) and assented to by the Operator’s management.
iv.
Any inspection deviation or non-conformance for any equipment/device with a
criticality ranking above MEDIUM as per the obtained RBI risk assessment results,
shall be submitted to the Department with justification for review and approval.
v.
RBI reassessment shall be conducted for any RBI-assessed facility within a
maximum of five (5) years from the last assessment/reassessment or whenever
there is a change or modification of the facility; whichever comes first.
vi.
After any RBI reassessment, the results shall be submitted to the Department in
line with Section 3.4.4 (ii).
4.3
RBI Annual Reports
Annual report for a preceding year shall be submitted to the Department by the third (3rd)
week of every January in both hard and soft copies (Microsoft Excel) with the following
details:
a. The inspections performed (facility-wise) for all equipment/devices due within the
reporting year. The inspection report shall contain the following;
i. Equipment/Device Description
ii. Equipment/Device serial number
iii. Equipment/Device tag number
iv. Inspection Date
v. Inspection Type
vi. Summary Inspection result
vii. Next Inspection Date