Library / Applicable to all Oil & Gas Operators PROCEDURE GUIDE FOR THE GRANT OF PERMIT/APPROVAL/LICENSE FOR LUBE OIL BLENDING/WASTE OIL RECYCLING PLANT Code: DPR Guide 0021 - 2020

Applicable to all Oil & Gas Operators PROCEDURE GUIDE FOR THE GRANT OF PERMIT/APPROVAL/LICENSE FOR LUBE OIL BLENDING/WASTE OIL RECYCLING PLANT Code: DPR Guide 0021 - 2020

Page 7 of 24

Open the PDF at page 7

 
 
 
 
Applicable to all Oil & Gas Operators  
PROCEDURE GUIDE FOR THE GRANT OF PERMIT/APPROVAL/LICENSE FOR 
LUBE OIL BLENDING/WASTE OIL RECYCLING PLANT 
Code: DPR Guide 0021 - 2020 
 
Revision Date: 2nd October 2020 
 
 
 
This is a property of the Department of Petroleum Resources. All rights reserved  
 
3 
Thousand Naira (N250,000.00) Only, made payable via DPR online payment 
platform. 
iii. 
A copy each of the Certificate of Registration of Trade Names and 
Descriptions under which the company proposes to market its products 
(where different from the blending company name) obtained from Ministry 
of Trade and Investment. 
iv. 
Detailed proposal on the project stating clearly: 
a. Formulations, Specifications, Classifications, Grades, Trade 
Names and Identifications of the products to be manufactured. 
b. Detailed description of laboratory facilities and equipment to be 
used for products quality control and applicable test methods to 
be adopted for lubricant quality assurance and control. 
c. Effluent handling and disposal methods. 
d. Project design basis stating among others the nameplate production 
capacity of the plant. 
v. 
A letter of introduction for the Engineering Design Firm (must possess a 
valid DPR Oil and Gas Industry Services Permit for the service to be 
rendered) nominated by company to carry out the design of the plant. 
vi. 
A schedule for the conduct of Engineering Designs of the plant to enable 
the monitoring of the project by DPR Engineers. Upon completion of the 
design, the company shall be expected to submit the following design 
deliverables to the Department: 
a. Architectural and Building Drawings which should include Civil and 
Structural Engineering Design Drawings, with all associated 
Sectional and Elevation Details (duly endorsed by State/Local 
Government Town Planning Authority). 
b. Mechanical Drawings (which shall include sectional details of storage