Library / Applicable to all Oil & Gas Operators PROCEDURE GUIDE FOR THE GRANT OF PERMIT/APPROVAL/LICENSE FOR LUBE OIL BLENDING/WASTE OIL RECYCLING PLANT Code: DPR Guide 0021 - 2020

Applicable to all Oil & Gas Operators PROCEDURE GUIDE FOR THE GRANT OF PERMIT/APPROVAL/LICENSE FOR LUBE OIL BLENDING/WASTE OIL RECYCLING PLANT Code: DPR Guide 0021 - 2020

Page 8 of 24

Open the PDF at page 8

Applicable to all Oil & Gas Operators
PROCEDURE GUIDE FOR THE GRANT OF PERMIT/APPROVAL/LICENSE FOR
LUBE OIL BLENDING/WASTE OIL RECYCLING PLANT
Code: DPR Guide 0021 - 2020

Revision Date: 2nd October 2020

4
tanks) of the Plant.
c. Electrical Drawings of the Plant.
d. Process Design Drawings which should include Process Flow
Diagrams (PFD) and Piping and Instrumentation Diagrams (P&ID) for
the Plant.
e. Utility Flow Diagram (UFD) for the Plant.
f. Safety and Fire Fighting Diagram for the Plant.
vii.
Codes, Standards and Specifications adopted in the design of the plant
with specifications of equipment and facilities to be installed.
viii.
A Report signed by the Chief Federal/State Fire officer, or an officer
authorized by him in that behalf, that he is satisfied with the proposed
arrangements for the prevention and containment of fire.
ix.
DPR approved Environmental Impact Assessment (EIA) Study for the
project.
x.
A project execution schedule for the installation/construction stage of the
project.
Upon a satisfactory appraisal of the above submission, the company shall be invited to
make a Technical Presentation to the Department on the project.
An Approval to Construct (ATC) the lube oil/recycling plant shall be granted by the
Department if satisfactory.
2.3.1
Validity of Approval to Construct
The validity of an approval to construct the blending/waste recycling plant shall be for a
period of twelve (12) months. It is expected that at least 50% mechanical erection would
have been achieved. Otherwise, a revalidation of the Approval to Construct will be
necessary.