Afrindustria/ Gas Gap Monitor

Library / © 2019 Department of Petroleum Resources. All rights reserved Department of Petroleum Resources (DPR) PROCEDURE GUIDE

© 2019 Department of Petroleum Resources. All rights reserved Department of Petroleum Resources (DPR) PROCEDURE GUIDE

Page 39 of 114

Open the PDF at page 39

 
38 | P a g e 
 
 
e) 
Average specific gravity of the crude at 60oF / density of product at 59oF. 
f) 
Equivalent API Gravity / SG of the cargo. 
g) 
Volume correction factors. 
h) 
Gross and net quantities of the cargo in barrels, long tons, cubic meters and metric 
tons as obtained from the tank dips/Meter Readings. 
i) 
Absolute values of BS&W in barrels and long tons. 
j) 
Meter Factor 
 
5.2.3.2 The Average BS&W for the whole cargo in a case where loading has taken place from 
more than one tank shall be obtained by dividing the total BS&W value by total gross 
volume at 60ᵒF of the cargo and expressed in percentage. 
5.2.3.3 The Equivalent API Gravity of the cargo in a case where loading has taken place from 
more than one tank shall be obtained as follows: 
5.2.3.3.1 Calculate the long tons per barrel factor of the cargo by dividing the net weight in 
long tons by its net volume in barrels. 
5.2.3.3.2 The factor thus obtained is referred to table 29 of the ASTM table of standards to 
obtain the corresponding dry specific gravity, which is in turn referred to table 21 of 
the ASTM tables to determine the equivalent API gravity of the cargo. 
5.2.3.4 In case of auto-sampler failure, pre-export BS&W shall be used for determining the 
quality of petroleum and petroleum product exported. 
5.2.3.5 After all the necessary values are determined and entries have been made in the 
relevant document, it is distributed in the following manner: 
 
Original Copy    -        To the consignor or his authorized representative. 
Duplicate Copy -       To the Department of Petroleum Resources Divisional office in the area. 
Triplicate Copy -         To the facility operator. 
Quadruplicate Copy - To be retained among the records of the Department of Petroleum 
Resources facility office. 
 
5.3 Export Permits 
Requirements for granting Crude Oil/Condensate/GTL/Gas Export Permits is as follows: 
5.3.1 New Application 
Companies making a foremost application for export permits must have a concession (Oil 
field) or a partnership in the concession with a consent letter from DPR conveying the 
approval of the Honourable Minister for the ownership of such. In addition, a consent letter 
from DPR conveying the assignment of interest to participating company(s) shall be 
included for first application.