Library / Applicable to all Oil & Gas Operators PROCEDURE GUIDE FOR THE GRANT OF APPROVAL FOR THIRD PARTY BLENDING AND LUBRICANTS FILLING PLANT Code: DPR Guide 0017 - 2020

Applicable to all Oil & Gas Operators PROCEDURE GUIDE FOR THE GRANT OF APPROVAL FOR THIRD PARTY BLENDING AND LUBRICANTS FILLING PLANT Code: DPR Guide 0017 - 2020

Page 7 of 11

Open the PDF at page 7

 
 
 
 
Applicable to all Oil & Gas Operators  
PROCEDURE GUIDE FOR THE GRANT OF APPROVAL FOR THIRD PARTY 
BLENDING AND LUBRICANTS FILLING PLANT 
Code: DPR Guide 0017 - 2020
 
Revision Date: 2nd October 2020 
 
 
 
This is a property of the Department of Petroleum Resources. All rights reserved  
 
3 
2.1.3 
Approval Process 
Upon receipt of the applicable requirements and a satisfactory review of the constituent 
submissions, the Department shall grant approval for the Third-Party Blending operation. 
The approval shall however be subject to the following conditions; 
i. 
Approval shall have a validity period of 90 days. 
ii. 
All third-party blending batches must carry a quality/quantity certificate which must 
be endorsed by a DPR representative before the blended batch leaves the blending 
plant. 
 
2.2 
Lubricant Filling Plant 
2.2.1 
Application Requirement 
All applications for Approval to Construct Lubricant Filling Plant shall be made on the 
Company’s letter headed paper and addressed to the Director/CEO, Department of 
Petroleum Resources. Each application shall be accompanied with the following 
documents; 
i. 
Evidence of registration with CAC (Certificate of incorporation). 
ii. 
A certified True Copy of Company’s Memorandum and Articles of Association. 
iii. 
Current tax clearance certificate. 
iv. A proof of ownership of land where filling plant is to be sighted. 
v. 
A letter from appropriate town planning authority authorizing the siting of the 
filling plant at the proposed site. 
vi. A certified copy of land survey map. 
vii. A copy of proposed layout drawings of the filling plant showing relative distances 
(in meters) of various units within the plant and the interrelationship with adjoining 
properties. 
viii. Evidence of payment of the prescribed processing fee of Two Hundred and Fifty 
Thousand Naira (N 250,000.00) only, payable via DPR online payment platform.