Afrindustria/ Gas Gap Monitor

Library / Page | 1 MIDSTREAM AND DOWNSTREAM PETROLEUM OPERATIONS REGULATIONS, 2024

Page | 1 MIDSTREAM AND DOWNSTREAM PETROLEUM OPERATIONS REGULATIONS, 2024

Page 41 of 101

Open the PDF at page 41

 
 
Page | 41 
 
having responsibility in the area to fell the tree or otherwise deal with 
it, and in such event shall upon application by any person interested 
in the tree pay such compensation as such officer shall consider 
necessary. 
59. The operator shall present to the Authority and demonstrate that 
adequate contingency plans have been made for protecting the 
environment where – 
(a) the test pressure results in a hoop stress greater than seventy-
five per    cent (75%) of the specified minimum yield strength 
of the pipeline based on its nominal wall thickness; or 
(b) the pipeline crosses or passes within 100 metres of a 
watercourse, 
Environmental 
Protection 
Guidelines 
60.  Pursuant to Section 114 (4) of the Act, additional conditions specific 
to the pipeline licence are as set out in this part and as may be prescribed 
in guidelines issued by the Authority, or any other standard prescribed by 
the Authority. 
Design, 
construction, 
and 
operations of 
pipeline.  
61. (1) The design of any pipeline for the purposes of these Regulations 
shall be – 
i. suitable for the purposes such as transportation of natural gas, 
liquid and petroleum liquids, including crude oil, refined products, 
natural gas liquid condensate and liquified petroleum gas; 
 
ii. in accordance with best international petroleum industry 
practices; and 
 
iii. as set out in these Regulations and Guidelines made pursuant to 
these Regulations. 
 
(2) The design for the relocation, replacement and upgrading of an 
existing pipeline shall also conform with the provisions of these 
Regulations. 
 
(3) The instruments and control system such as pressure relief devices and 
pipeline protection systems shall be designed to internationally 
recognized standards and shall meet both functional requirements and 
the requirements for safety, reliability, and real time response. 
 
Design